Marine Vinyl Flooring Glue
Recommended for Marideck Marine Flooring
Use our Water Based Solvent for Wood and our Solvent Based Glue for Aluminum, Fiberglass or wood.
1 Gallon will usually cover about 14 Feet of flooring (125 sqft)
3 Gallons will usually cover about 42 Feet of flooring (375 sqft)
INSTRUCTIONS
Â
Prep the area to make sure it is clean of all debris. It is best to apply to a smooth surface. Apply the adhesive evenly with a paint roller. Allow the adhesive to dry approximately 5-10 minutes until it feels a bit tacky with your finger. Roll flooring over the glue and apply even pressure. Some People have used a heavy pipe or a simple push broom to evenly press the flooring down on to the glue.
Â
IMPORTANT: If your wood surface is sealed with a water-proofing sealant, then MD-102 (sovent-based) adhesive must be used.
Original: $43,400.00
-70%$43,400.00
$13,020.00More Images
Marine Vinyl Flooring Glue
Recommended for Marideck Marine Flooring
Use our Water Based Solvent for Wood and our Solvent Based Glue for Aluminum, Fiberglass or wood.
1 Gallon will usually cover about 14 Feet of flooring (125 sqft)
3 Gallons will usually cover about 42 Feet of flooring (375 sqft)
INSTRUCTIONS
Â
Prep the area to make sure it is clean of all debris. It is best to apply to a smooth surface. Apply the adhesive evenly with a paint roller. Allow the adhesive to dry approximately 5-10 minutes until it feels a bit tacky with your finger. Roll flooring over the glue and apply even pressure. Some People have used a heavy pipe or a simple push broom to evenly press the flooring down on to the glue.
Â
IMPORTANT: If your wood surface is sealed with a water-proofing sealant, then MD-102 (sovent-based) adhesive must be used.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Recommended for Marideck Marine Flooring
Use our Water Based Solvent for Wood and our Solvent Based Glue for Aluminum, Fiberglass or wood.
1 Gallon will usually cover about 14 Feet of flooring (125 sqft)
3 Gallons will usually cover about 42 Feet of flooring (375 sqft)
INSTRUCTIONS
Â
Prep the area to make sure it is clean of all debris. It is best to apply to a smooth surface. Apply the adhesive evenly with a paint roller. Allow the adhesive to dry approximately 5-10 minutes until it feels a bit tacky with your finger. Roll flooring over the glue and apply even pressure. Some People have used a heavy pipe or a simple push broom to evenly press the flooring down on to the glue.
Â
IMPORTANT: If your wood surface is sealed with a water-proofing sealant, then MD-102 (sovent-based) adhesive must be used.